ZXMS6005SGTA
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Weight | 7.994566mg |
| Transistor Element Material | SILICON |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | INTELLIFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | LOGIC LEVEL COMPATIBLE |
| Max Power Dissipation | 1.6W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Voltage - Supply (Vcc/Vdd) | 3.3V 5V |
| Case Connection | SOURCE |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 μs |
| Switch Type | General Purpose |
| Transistor Application | SWITCHING |
| Rise Time | 14μs |
| Drain to Source Voltage (Vdss) | 65V |
| Fall Time (Typ) | 19 μs |
| Turn-Off Delay Time | 34 μs |
| Continuous Drain Current (ID) | 2A |
| Threshold Voltage | 1V |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 5V |
| Voltage - Load | 60V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| DS Breakdown Voltage-Min | 60V |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 150m Ω |
| Drain to Source Resistance | 150mOhm |
| Height | 1.65mm |
| Length | 6.55mm |
| Width | 3.55mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 17 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
ZXMS6005SGTA Overview
The LED driver's packaged as a Tape & Reel (TR).It is included with the TO-261-4, TO-261AA package as well.The lighting driver has the mounting type Surface Mount.A General Purpose switch type is owned by it.To ensure reliable performance, the temperature should be set to -40°C~125°C TA.The LED driver is equipped with 1 outputs.The LED driving board is powered by a voltage of 3.3V 5V.Voltage output is N-Channel volts at maximum.The lighting driver has Auto Restart features.It contains 4 terminations.In order to operate, 4 pins are used.This lighting driver is mounted in the way of Surface Mount.It is equipped with a total of 4 pins.This electrical component is part of the INTELLIFET? series.With this LED driver, LOGIC LEVEL COMPATIBLE can also be produced.The total number of elements is 1.To name a few, the lighting driver has SWITCHING transistor application.
ZXMS6005SGTA Features
Additional features like LOGIC LEVEL COMPATIBLE
Transistor applications such as SWITCHING
ZXMS6005SGTA Applications
There are a lot of Diodes Incorporated ZXMS6005SGTA Power Switches ICs applications.
- Portable GPS
- Storage Drives
- Smart Phones, Feature Phones
- Low Voltage I/O System Power
- Set-Top Boxes
- Portable Devices
- Telecom and Network Systems
- Notebook PC
- USB3.1 Power Delivery
- Portable GPS Device