| Parameters |
| Factory Lead Time |
15 Weeks |
| Mount |
Surface Mount |
| Mounting Type |
Surface Mount |
| Package / Case |
44-LCC (J-Lead) |
| Number of Pins |
44 |
| Operating Temperature |
0°C~70°C |
| Packaging |
Tube |
| Published |
1999 |
| Series |
Z53C80 |
| JESD-609 Code |
e3 |
| Pbfree Code |
yes |
| Part Status |
Active |
| Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
| Number of Terminations |
8 |
| Type |
SCSI |
| Terminal Finish |
MATTE TIN |
| Technology |
CMOS |
| Voltage - Supply |
4.75V~5.25V |
| Terminal Position |
QUAD |
| Terminal Form |
J BEND |
| Peak Reflow Temperature (Cel) |
260 |
| Supply Voltage |
5V |
| Terminal Pitch |
1.27mm |
| Time@Peak Reflow Temperature-Max (s) |
40 |
| Pin Count |
44 |
| Operating Supply Voltage |
5V |
| Nominal Supply Current |
15mA |
| Max Supply Current |
15mA |
| Address Bus Width |
3 |
| External Data Bus Width |
8 |
| Data Transfer Rate-Max |
3 MBps |
| Drive Interface Standard |
X3.131 |
| Height Seated (Max) |
4.57mm |
| Radiation Hardening |
No |
| RoHS Status |
ROHS3 Compliant |
| Lead Free |
Lead Free |
Z53C8003VSG Overview
It is possible to terminate a transmission line with a device matching the impedance of the line, which is known as 8 termination. Because of its low package cost, the 44-LCC (J-Lead) is widely used in the electronic industry. Material choices are based on Tube's. Mounting it on a PCB is done with Surface Mount. There should be no more than 0°C~70°C operating temperature. The material meets SCSI-qualification for standard applications. In order to maintain normal operation, there is a 4.75V~5.25V Supply Voltage provided. There are also 44 pins available for specific purposes. Keeping the supply voltage at 5V is essential for high efficiency. The Surface Mount-mount is attached to it. Computers and other communications devices use 44 pins, which are pronged contacts. A current supply must be provided to 5V so that it can function properly. In its operation, maximum current reaches 15mA. Because of its performance-cost ratio, the Z53C80 Series is a great value.
Z53C8003VSG Features
8 terminations
Tube package
44 pin count
44 pins
Z53C80 series
Z53C8003VSG Applications
There are a lot of Zilog Z53C8003VSG Signal Terminators applications.
- Disk array (RAID)
- Network attached storage (NAS)
- personal computers
- plotters
- ESD protection and termination of USB downstream ports downstream ports
- Programmable logic controller
- Data Networking
- Data Routers
- mainframes
- Data Routers