XCR3256XL-10FT256I
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2003 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 164 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 6000 |
| Max Frequency | 105MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.7V~3.6V |
| Delay Time tpd(1) Max | 9.1ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.55mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
XCR3256XL-10FT256I Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is part of the 256-LBGA package.The device is programmed with 164 I/O ports.There is a 256terminations set on devices.This electrical part is wired with a terminal position of BOTTOM.Power is supplied by a voltage of 3.3V volts.This part is part of the family [0].Package the chip by Bulk.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.It is recommended that Surface Mountholds the chip in place.In FPGA terms, it is a type of CoolRunner XPLA3series FPGA.There are 256 pins on the chip.If this device is used, you will also be able to find [0].6000gates are devices that serve as building blocks for digital circuits.For high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].There are 16 logic elements/blocks.A maximum supply voltage (Vsup) of 3.6V is provided.It is recommended that the maximum frequency be less than 105MHz.
XCR3256XL-10FT256I Features
256-LBGA package
164 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
XCR3256XL-10FT256I Applications
There are a lot of Xilinx Inc. XCR3256XL-10FT256I CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- Address decoding
- Dedicated input registers
- Software-driven hardware configuration
- Auxiliary Power Supply Isolated and Non-isolated
- I2C BUS INTERFACE
- ROM patching
- State machine design
- Power up sequencing
- Configurable Addressing of I/O Boards