XC9572-15PQG100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC9572 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 72 |
| Memory Type | FLASH |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Number of Gates | 1600 |
| Max Frequency | 55.6MHz |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 72 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Logic Elements/Blocks | 4 |
| Height | 2.7mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
XC9572-15PQG100C Overview
There are 72 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The product is contained in a 100-BQFP package.It is equipped with 72I/O ports.There is a 100terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 5Vprovides power to the device.There is a part included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].Ideally, the chip should be mounted by Surface Mount.This type of FPGA is a part of the XC9500 series.A chip with 100pins is programmed.The device can also be used to find [0].There are related parts in [0].As a building block for digital circuits, there are 1600gates.If high efficiency is desired, the supply voltage should be kept at [0].In general, it is recommended to store data in [0].Surface Mountmounts this electronic component.There are 100pins on it.It operates at a maximum supply voltage of 5.25V volts.A minimum supply voltage of 4.75V is required for this device to operate.There are 4 logic elements/blocks.It is recommended not to exceed 55.6MHzin terms of frequency.In its simplest form, it consists of 8 logic blocks (LABs).
XC9572-15PQG100C Features
100-BQFP package
72 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
8 logic blocks (LABs)
XC9572-15PQG100C Applications
There are a lot of Xilinx Inc. XC9572-15PQG100C CPLDs applications.
- INTERRUPT SYSTEM
- Handheld digital devices
- Software-Driven Hardware Configuration
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- ROM patching
- Voltage level translation
- Software-driven hardware configuration
- Custom shift registers
- ON-CHIP OSCILLATOR CIRCUIT
- State machine design