XC95288XL-10TQ144I
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC95288XL |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 117 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Gates | 6400 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 288 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC95288XL-10TQ144I Overview
288 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.144-LQFPis the package in which it resides.As you can see, this device has 117 I/O ports programmed into it.There is a 144terminations set on devices.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.An electrical supply voltage of 3.3V is used to power it.There is a part in the family [0].Package the chip by Tray.The operating temperature of the machine is -40°C~85°C TA to ensure its reliability.Chips should be mounted by Surface Mount.The XC9500XLseries FPGA is one of these types.A chip with 144pins is programmed.The XC95288XLcontains its related parts.As a building block for digital circuits, there are 6400gates.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.It is recommended that data be stored in [0].It is mounted by Surface Mount.The device has a pinout of [0].In this case, the maximum supply voltage is 3.6V.It operates with the minimal supply voltage of 3V.It is possible to achieve a frequency of 100MHz.The fundamental building block consists of 16logic elements/cells.
XC95288XL-10TQ144I Features
144-LQFP package
117 I/Os
The operating temperature of -40°C~85°C TA
144 pin count
144 pins
XC95288XL-10TQ144I Applications
There are a lot of Xilinx Inc. XC95288XL-10TQ144I CPLDs applications.
- POWER-SAVING MODES
- Wide Vin Industrial low power SMPS
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Reset swapping
- High speed graphics processing
- I2C BUS INTERFACE
- Digital multiplexers
- D/T registers and latches
- Bootloaders for FPGAs
- Wireless Infrastructure Base Band Unit and Remote Radio Unit