XC95144XL-7TQ144I
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC95144XL |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 117 |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 8 |
| Number of Gates | 3200 |
| Max Frequency | 125MHz |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 144 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 10 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
XC95144XL-7TQ144I Overview
A mobile phone network consists of 144macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is contained in package [0].There are 117 I/Os on the board.Terminations of devices are set to [0].QUADis the terminal position of this electrical part.A voltage of 3.3V is used as the power supply for this device.There is a part in the family [0].Ideally, the chip should be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended that Surface Mountholds the chip in place.This type of FPGA is a part of the XC9500XL series.It is programmed with 144 pins.When using this device, YEScan also be found.In accordance with the [0], its related parts are listed.In digital circuits, there are 3200gates, which act as a basic building block.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.In general, it is recommended to store data in [0].It is mounted by Surface Mount.A maximum supply voltage of 3.6Vis used in its operation.With a minimal supply voltage of [0], it operates.It is important to make sure that the maximum frequency is less than 125MHz.A fundamental building block consists of 8logic elements/cells.
XC95144XL-7TQ144I Features
144-LQFP package
117 I/Os
The operating temperature of -40°C~85°C TA
144 pin count
XC95144XL-7TQ144I Applications
There are a lot of Xilinx Inc. XC95144XL-7TQ144I CPLDs applications.
- Synchronous or asynchronous mode
- Power up sequencing
- Parity generators
- ROM patching
- Configurable Addressing of I/O Boards
- Field programmable gate
- Wide Vin Industrial low power SMPS
- Custom shift registers
- I/O expansion
- Timing control