XC95108-10PQG100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC95108 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 81 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Number of Logic Elements/Cells | 8 |
| Number of Gates | 2400 |
| Max Frequency | 66.7MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 108 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Logic Elements/Blocks | 6 |
| Height | 2.7mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
XC95108-10PQG100C Overview
There are 108 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is enclosed in a 100-BQFP package.There are 81 I/Os on the board.There is a 100terminations set on devices.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The device is powered by a voltage of 5V volts.The part belongs to Programmable Logic Devices family.Trayis the packaging method.Due to its reliability, it is operated at a temperature of [0].It is mounted in the way of Surface Mount.In FPGA terms, it is a type of XC9500series FPGA.In this chip, the 100pins are programmed.The device can also be used to find [0].The XC95108indicates that its related parts can be found.2400gates are used to construct digital circuits.Optimal efficiency requires a supply voltage of [0].It is adopted to store data in [0].It is mounted by Surface Mount.The 100pins are designed into the board.With a maximum supply voltage of [0], it operates.It is powered by 4.75Vas its minimum supply voltage.A total of 6logic elements/blocks are present.It is recommended that the maximum frequency be less than 66.7MHz.A fundamental building block consists of 8logic elements/cells.
XC95108-10PQG100C Features
100-BQFP package
81 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
XC95108-10PQG100C Applications
There are a lot of Xilinx Inc. XC95108-10PQG100C CPLDs applications.
- Software Configuration of Add-In Boards
- Timing control
- Power Meter SMPS
- Custom state machines
- Bootloaders for FPGAs
- D/T registers and latches
- Complex programmable logic devices
- Wide Vin Industrial low power SMPS
- Configurable Addressing of I/O Boards
- DMA control