X5043PIZ-4.5A
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | DETECTION THRESHOLD VOLTAGE IS 4.62 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | X5043 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Reset | Active Low |
| Voltage - Threshold | 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Height Seated (Max) | 5.334mm |
| Length | 9.525mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
X5043PIZ-4.5A Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaging is in the form of a Tube. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be NOT SPECIFIED. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. It has a total of 8 pins that are attached to IC management. Power management recommends the Through Hole mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The other features include, for example, [0], which is just one example. You can always use X5043, the base supervisor number, to search for similar PMICs of the manufacturer.
X5043PIZ-4.5A Features
Simple Reset/Power-On Reset type
X5043PIZ-4.5A Applications
There are a lot of Renesas Electronics America Inc. X5043PIZ-4.5A Voltage Supervisors applications.
- Battery cars
- Power distribution systems of CCU
- Automotive power systems
- Important electronics for automotive protection
- External alarm
- Network equipment
- Electronics installed in the vehicle
- Utility meter
- Efficient information transmission
- DVR