VNV49N04
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 40mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 125W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | VNV49 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 49A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 28A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 49A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 33V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 3.8 μs |
| Output Peak Current Limit-Nom | 49A |
| Rds On (Typ) | 40m Ω (Max) |
| Drain to Source Resistance | 40mOhm |
| Turn Off Time | 24 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
VNV49N04 Overview
As a result, it is packaged in the form of a Tube.The PowerSO-10 Exposed Bottom Pad package includes it.The lighting driver has the mounting type Surface Mount.It owns General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.I believe it belongs to the VNV49 family.It contains 10 terminations.In order to operate, 10 pins are used.The LED driver has 1 functions.As a result, the maximum output current is reduced to 49A in order to meet the operation requirements.Surface Mount is mounted in the way.The LED driving board is equipped with a total of 10 pins.Currently, the LED driving board has a resistance of 40mOhm ohms.This electrical component can be found in the OMNIFET?, VIPower? series.As a result, the output current is set to 28A.A supply voltage of 18V is recommended for maximum efficiency.For its operation, a current of 250μA is required.
VNV49N04 Features
Resistance of 40mOhm
VNV49N04 Applications
There are a lot of STMicroelectronics VNV49N04 Power Switches ICs applications.
- Storage Drives
- Smartphone and PDA
- Wireless/Networking Cards
- Gaming
- Hot Swaps
- Mobile Communication Devices
- HDD and SSD
- Solid State Drivers
- Hard Disk Drives
- PC Cards