VNV20N0713TR
| Parameters | |
|---|---|
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 20A |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Max Power Dissipation | 83W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | VNV20 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 14A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 83W |
VNV20N0713TR Overview
It is package in Tape & Reel (TR) case.Package PowerSO-10 Exposed Bottom Pad contains it.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the type of switch owned by it.The LED driver has a total of 1 outputs.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It comes under the family of VNV20.It consists of 10 terminations in total.10 pins are used for operation.The LED driver has 1 functions.This results in the maximum output current dropping to 14A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.It is equipped with a total of 10 pins.50mOhm is the resistance of the lighting driver.A component of this type is included in the OMNIFET?, VIPower? series.As a result, the output current is set to 14A.For maximum efficiency, the supply voltage should be set to 18V.For its operation, a current of 250μA is required.
VNV20N0713TR Features
Resistance of 50mOhm
VNV20N0713TR Applications
There are a lot of STMicroelectronics VNV20N0713TR Power Switches ICs applications.
- Portable Music Players
- Notebook and Tablet Computers
- Set-Top Boxes
- HDD and SSD
- PDAs
- Telecom and Network Systems
- USB Power Distribution
- Portable GPS Device
- Portable Video Game Players
- Notebook PC