VNS14NV0413TR
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 4.6W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | VNS14N |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 12A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 4.6W |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 12A |
| Continuous Drain Current (ID) | 12A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Turn On Time | 4.5 μs |
| Output Peak Current Limit-Nom | 18A |
| Rds On (Typ) | 35m Ω (Max) |
| Drain to Source Resistance | 35mOhm |
| Turn Off Time | 25 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
VNS14NV0413TR Overview
The LED driver's packaged as a Cut Tape (CT).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates at Not Required volts.The maximum output voltage of this LED driver is N-Channel volts.It comes under the family of VNS14N.It consists of 8 terminations in total.It is necessary to use the 8 pins in order to operate the LED driver.The LED driver has 1 functions.This results in the maximum output current dropping to 12A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.It is equipped with a total of 8 pins.Lighting drivers with 35mOhm resistance are used.This electrical component is included in the OMNIFET II?, VIPower? series.This case results in a 12A output current.It operates at a maximum current of 100μA.
VNS14NV0413TR Features
Resistance of 35mOhm
VNS14NV0413TR Applications
There are a lot of STMicroelectronics VNS14NV0413TR Power Switches ICs applications.
- Set-Top Boxes
- Low Voltage I/O System Power
- Solid State Drivers
- Hot Swap
- Wearable Devices
- USB Power Distribution
- Wireless/Networking Cards
- Wireless Modem Data Cards
- Various applications equipped with buttons
- Smartphone and PDA