VNQ5E160KTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 160MOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Current Rating | 10A |
| Base Part Number | VNQ5E160 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 7A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Interface | On/Off |
| Nominal Supply Current | 14mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 14mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 μs |
| Switch Type | General Purpose |
| Clamping Voltage | 52V |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 15 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ5E160KTR-E Overview
It is package in Tape & Reel (TR) case.There is a package for it in the 24-SOP (0.295, 7.50mm Width) Exposed Pad package.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.By default, it is set to output 4.Operation is based on Not Required supply voltage.It produces a maximum output voltage of N-Channel volts at its maximum output.Auto Restart features are available on the lighting driver.It belongs to the VNQ5E160 family.It has a total of 24 terminations.In order to operate, 24 pins are used.Currently, there are 1 functions associated with the lighting driver.Maximum output current falls to 7A when operation criteria are met.The supply voltage can be 13V for high efficiency.As a result, it is mounted in the manner of Surface Mount.The LED driver has a total of 24 pins.Currently, the LED driving board has 160MOhm resistance.It is part of the VIPower? series.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The LED driver is configured with a maximum supply voltage of 28V (Vsup).This part's power supply is 8/28V.In order to optimize the efficiency of the supply voltage, it should be set to 13V.There is a maximum current requirement of 14mA for its operation.
VNQ5E160KTR-E Features
Supplied from 13V
Resistance of 160MOhm
VNQ5E160KTR-E Applications
There are a lot of STMicroelectronics VNQ5E160KTR-E Power Switches ICs applications.
- Notebook and Tablet Computers
- Hot Swap
- Handheld Devices
- Solid-State Drives
- PC Cards
- Wireless Modem Data Cards
- PDAs
- Telecom and Network Systems
- Set-top-box
- Mobile Communication Devices