VNP35N07
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated DC | 70V |
| Max Power Dissipation | 125W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Current Rating | 35A |
| Base Part Number | VNP35N |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 25A |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 35A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Supply Current-Max | 0.5mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 350ns |
| Drain to Source Voltage (Vdss) | 70V |
| Continuous Drain Current (ID) | 35A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 20V |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Turn On Time | 0.8 μs |
| Load Current | 35A |
| Output Peak Current Limit-Nom | 35A |
| Rds On (Typ) | 280m Ω (Max) |
| Drain to Source Resistance | 28mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
VNP35N07 Overview
Tube is the way it's packaged.Package TO-220-3 contains it.It has been mounted as Through Hole on the LED driver.General Purpose is the type of switch owned by it.The LED driver has a total of 1 outputs.A voltage of Not Required is used to power it.It has a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.It belongs to the family VNP35N.As a result, there are 3 terminations.It is important to note that the LED driving board has 1 functions.The maximum output current is reduced to 25A to meet the operation criteria.It is positioned in the direction of Through Hole.In total, it has 3 pins.The OMNIFET?, VIPower? series includes this electrical component.It is set to 35A in this case.
VNP35N07 Features
VNP35N07 Applications
There are a lot of STMicroelectronics VNP35N07 Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Portable/Handheld Devices
- Set-Top Boxes
- Notebook PC
- Low Voltage I/O System Power
- USB Power Distribution
- Wireless Modem Data Cards
- Storage Drives
- Solid State Drivers
- Portable Devices