VNP10N06FI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 Full Pack |
| Number of Pins | 3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 27W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Base Part Number | VNP10N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Interface | On/Off |
| Nominal Supply Current | 150μA |
| Output Configuration | Low Side |
| Power Dissipation | 27W |
| Output Current | 6A |
| Max Supply Current | 150μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 10A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 60V |
| Output Peak Current Limit-Nom | 10A |
| Rds On (Typ) | 150m Ω |
| Drain to Source Resistance | 300mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNP10N06FI Overview
The LED driver's packaged as a Tube.This file is included in package TO-220-3 Full Pack.Through Hole is the mounting type of the LED driver.It owns General Purpose switch type.The lighting driver has a total of 1 outputs that are available for use.There is a maximum output voltage of N-Channel volts on this LED driver.There is a VNP10N family of things that it belongs to.A total of 3 terminations have been found in it.The 3 pins are used for the operation of the system.It has 1 functions.The maximum output current must drop to 6A to meet the operation criteria.In this case, it is mounted in the way of Through Hole.In total, it has 3 pins.There is 150mOhm resistance on the LED driver.It is part of the OMNIFET?, VIPower? series.This case results in a 6A output current.A maximum current requirement of 150μA is required for its operation.
VNP10N06FI Features
Resistance of 150mOhm
VNP10N06FI Applications
There are a lot of STMicroelectronics VNP10N06FI Power Switches ICs applications.
- Wireless Headsets
- Gaming
- Notebook and Tablet Computers
- USB Ports/Hubs
- Handheld Devices
- Hard Disk Drives
- HDD and SSD
- Wearable Devices
- Various applications equipped with buttons
- Portable Devices