VNN3NV04PTR-E
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 7W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNN3NV |
| Pin Count | 4 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Interface | On/Off |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 7W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 90 ns |
| Switch Type | General Purpose |
| Output Current per Channel | 3.5A |
| Rise Time | 250ns |
| Fall Time (Typ) | 250 ns |
| Turn-Off Delay Time | 450 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 120m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| On-State Resistance | 120mOhm |
| Height | 1.9mm |
| Length | 6.7mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 20 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Weight | 188.014037mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
VNN3NV04PTR-E Overview
Tape & Reel (TR) is how it's packaged.There is a TO-261-4, TO-261AA package that includes it.The mounting type of the LED driver is Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is N-Channel volts.As you can see, it comes from the VNN3NV family.As a result, there are 4 terminations.4 pins are used for operation.It has 1 functions.The maximum output current must drop to 5A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this LED driving board.As a result, it has a total of 4 pins.120mOhm is the resistance of the lighting driver.This electrical component is included in the OMNIFET II?, VIPower? series.It is set to 3.5A in this case.Drivers for this part number 1 are available.
VNN3NV04PTR-E Features
Supplied from 5V
Resistance of 120mOhm
VNN3NV04PTR-E Applications
There are a lot of STMicroelectronics VNN3NV04PTR-E Power Switches ICs applications.
- Hot Swaps
- HDD and SSD
- USB3.1 Power Delivery
- PDAs
- USB Ports/Hubs
- Solid State Drivers
- Hard Disk Drives
- Storage Drives
- Mobile Communication Devices
- Smartphone and PDA