VND7NV04TR-E
| Parameters | |
|---|---|
| Factory Lead Time | 20 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Manufacturer Package Identifier | TO-252-P032P |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 60W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND7N |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 60W |
| Output Current | -10.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Switch Type | General Purpose |
| Rise Time | 470ns |
| Drain to Source Voltage (Vdss) | 45V |
| Fall Time (Typ) | 350 ns |
| Turn-Off Delay Time | 500 ns |
| Continuous Drain Current (ID) | 6A |
| Threshold Voltage | 500mV |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 45V |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Drain to Source Resistance | 60mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Nominal Vgs | 500 mV |
| On-State Resistance | 60mOhm |
| Height | 2.4mm |
| Length | 6.6mm |
| Width | 6.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND7NV04TR-E Overview
It is packaged in the manner of a Tape & Reel (TR).There is a TO-252-3, DPak (2 Leads + Tab), SC-63 package that includes it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.As a default, the output is set to 1.It uses a supply voltage of Not Required to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.The VND7N family contains this object.The termination count is 2.For operation, we use the 3 pins.It is important to note that the LED driving board has 1 functions.The maximum output current is reduced to 9A to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.As a result, it has a total of 3 pins.60mOhm is the resistance of the lighting driver.It is included in the OMNIFET II?, VIPower? series.In this case, the output current is set to -10.5A.
VND7NV04TR-E Features
Resistance of 60mOhm
VND7NV04TR-E Applications
There are a lot of STMicroelectronics VND7NV04TR-E Power Switches ICs applications.
- Portable Music Players
- USB Power Distribution
- Wireless Headsets
- Solid State Drivers
- USB Ports/Hubs
- HDD and SSD
- Various applications equipped with buttons
- USB Power Distribution
- HDD, SSD
- Mobile Communication Devices