VND14NV04TR-E
| Parameters | |
|---|---|
| Factory Lead Time | 20 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 74W |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Base Part Number | VND14 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Output Type | N-Channel |
| Max Output Current | 12A |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 74W |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 80 ns |
| Switch Type | General Purpose |
| Rise Time | 350ns |
| Fall Time (Typ) | 150 ns |
| Turn-Off Delay Time | 450 ns |
| Continuous Drain Current (ID) | 12A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Number of Drivers | 1 |
| Turn On Time | 4.5 μs |
| Output Peak Current Limit-Nom | 18A |
| Rds On (Typ) | 35m Ω (Max) |
| Drain to Source Resistance | 35mOhm |
| Turn Off Time | 25 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 2.63mm |
| Length | 5.1mm |
| Width | 4.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND14NV04TR-E Overview
Tape & Reel (TR) is how it's packaged.This package is included in TO-252-3, DPak (2 Leads + Tab), SC-63.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is part of the VND14 family of LED drivers.It contains 2 terminations.In order to operate, the 3 pins are used.The LED driving board has a total of 1 functions.This results in the maximum output current dropping to 12A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.A total of 3 pins are included in this LED driver.The LED driver has 35mOhm resistance.The OMNIFET II?, VIPower? series includes this electrical component.This results in a 12A output current.It operates at a maximum current of 100μA.There are 1 drivers available for this part.
VND14NV04TR-E Features
Resistance of 35mOhm
VND14NV04TR-E Applications
There are a lot of STMicroelectronics VND14NV04TR-E Power Switches ICs applications.
- HDD, SSD
- Portable Video Game Players
- Hot Swap
- Notebook PC
- Gaming
- Smart Phones, Feature Phones
- Various applications equipped with buttons
- Low Voltage I/O System Power
- USB3.1 Power Delivery
- Portable Devices