VNB49N04-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Supplier Device Package | D2PAK |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 40mOhm |
| Max Power Dissipation | 125W |
| Base Part Number | VNB49 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 49A |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Interface | On/Off |
| Current - Output (Max) | 28A |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 28A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 49A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 33V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Rds On (Typ) | 40mOhm (Max) |
| Drain to Source Resistance | 40mOhm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNB49N04-E Overview
The package is in the form of a Tube.In the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package, it is included.The mounting type of the LED driver is Surface Mount.It owns the General Purpose switch type.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The LED driver is equipped with 1 outputs.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is N-Channel volts.In terms of features, the LED driving board has Status Flag.It belongs to the VNB49 family.For operation, we use the 3 pins.The lighting driver's maximum output is 28AV.As a result, the maximum output current is reduced to 49A in order to meet the operation requirements.The LED driving board is mounted in the way of Surface Mount.It has a resistance of 40mOhm.A component of this type is included in the OMNIFET?, VIPower? series.As a result, the output current is set to 28A.There are a total of 1 available channels.In order to maximize efficiency, the supply voltage should be set to 18V.It requires 250μA current to operate.
VNB49N04-E Features
Resistance of 40mOhm
1 channels
VNB49N04-E Applications
There are a lot of STMicroelectronics VNB49N04-E Power Switches ICs applications.
- Hard Disk Drives
- USB3.1 Power Delivery
- Hot Swap
- Telecom and Network Systems
- PC Card Hot Swap
- USB Power Distribution
- Set-top-box
- Smartphone and PDA
- Solid-State Drives
- Storage Drives