VN920B5TR-E
| Parameters | |
|---|---|
| Switch Type | General Purpose |
| Output Current per Channel | 45A |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 18m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 4.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 18 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | P2PAK (4 Leads + Tab) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 16mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96.1W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Current Rating | 75A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN920 |
| Pin Count | 5 |
| JESD-30 Code | R-PSSO-G4 |
| Output Type | N-Channel |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 96.1W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
VN920B5TR-E Overview
The LED driver's packaged as a Tape & Reel (TR).This package is included in P2PAK (4 Leads + Tab).It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts on this LED driver.Features of the lighting driver are Auto Restart.The VN920 family consists of this type.It contains 4 terminations.The 5 pins are used for the operation of the system.It contains 1 functions.With a supply voltage of 13V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.5 pins are equipped with it.It has a resistance of 16mOhm.This electrical component can be found in the VIPower? series.This case results in a 30A output current.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In this LED driver, the maximum supply voltage is configured to be 36V (Vsup).The power supply of the part is 8/36V.Optimal efficiency requires a voltage of 13V.It has 1 drivers in the part.
VN920B5TR-E Features
Supplied from 13V
Resistance of 16mOhm
VN920B5TR-E Applications
There are a lot of STMicroelectronics VN920B5TR-E Power Switches ICs applications.
- Wireless Modem Data Cards
- Storage (HDDs, SSDs)
- PDAs
- Storage Drives
- Various applications equipped with buttons
- Hot Swaps
- Mobile Communication Devices
- Portable Music Players
- Solid-State Drives
- Portable GPS Device