VN820
| Parameters | |
|---|---|
| Nominal Supply Current | 25mA |
| Output Configuration | High Side |
| Power Dissipation | 65.8W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 13A |
| Rds On (Typ) | 40m Ω (Max) |
| Drain to Source Resistance | 80mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| RoHS Status | Non-RoHS Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 65.8W |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN820 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
VN820 Overview
It is packaged in the form of a Tube.The Pentawatt-5 (Vertical, Bent and Staggered Leads) package includes it.A Through Hole mounting is used for the LED driving board.The switch type of this switch is General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The lighting driver has Auto Restart, Status Flag features.It belongs to the family VN820.A total of 5 terminations have been recorded.For operation, we use the 5 pins.As far as the lighting driver is concerned, there are 1 functions.The maximum output current must drop to 9A to meet the operation criteria.A supply voltage of 13V leads to high efficiency.As a result, it is mounted in the manner of Through Hole.This LED driver is equipped with a total of 5 pins.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The maximum supply voltage is set to 36V.There is a voltage supply of 8/36V volts on this part.Drivers for this part number 1 are available.
VN820 Features
Supplied from 13V
VN820 Applications
There are a lot of STMicroelectronics VN820 Power Switches ICs applications.
- Wearable Devices
- Hot Swap
- Hard Disk Drives
- PC Card Hot Swap
- USB Ports/Hubs
- Portable GPS
- Portable Video Game Players
- PC Cards
- Storage (HDDs, SSDs)
- HDD and SSD