VN772KPTR-E
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VN772 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Interface | Logic |
| Output Configuration | Half Bridge (2) |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 9A |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting, ESD, Open Load Detect, Over Temperature, Over Voltage, Short Circuit, UVLO |
| Turn On Time | 2.3 µs |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 125m Ω (Max) |
| Turn Off Time | 16 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Load Type | Inductive |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Applications | DC Motors, General Purpose, Relays |
| Technology | Power MOSFET |
| Voltage - Supply | 5.5V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
VN772KPTR-E Overview
For packaging, Tape & Reel (TR) is used.A cost-saving measure is taken to include H bridge in the 28-SOIC (0.295, 7.50mm Width) package.Bridge driver is possible to ensure improved reliabilbridge drivery by varying the supply voltage of 5.5V~36V.In the way of Surface Mount, H bridge circuit is mounted.-40°C~150°C TJ is able to function normally at motor driver H bridges operating temperature.Among H bridge motor drivers many applications are DC Motors, General Purpose, Relays.Mount the board using Surface Mount.Among full bridges specific characteristics is Status Flag.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 28 terminations are employed.A signal interface uses 28 pins as pronged contacts.Based on its base H bridge ic number of VN772, further related H bridge ics can be identified.The H bridge operates at a voltage of 13V.Basically, it is an electronic H-bridge that belongs to the OMNIFET II?, VIPower? series.It is the 28 pins that enable this bridge driver to perform its specific functions.It is equipped with a 4 output.
VN772KPTR-E Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : VN772
VN772KPTR-E Applications
There are a lot of STMicroelectronics VN772KPTR-E Full Bridge Drivers, Half-Bridge Drivers applications.
- OA equipments
- High-Current DC-DC Point-of-Load Converters
- Desktop Computers
- Home Appliances
- DC-DC Converters
- Bipolar stepper motor
- Industrial Pumps
- Voltage Regulators for GPUs
- Audio-visual equipment
- Non-V-Core