VN772K
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose, Relays |
| Max Power Dissipation | 6W |
| Technology | Power MOSFET |
| Voltage - Supply | 5.5V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VN772 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 5mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 6W |
| Output Current | 8.5A |
| Max Supply Current | 40mA |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 9A |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting, ESD, Open Load Detect, Over Temperature, Over Voltage, Short Circuit, UVLO |
| Rds On (Typ) | 120m Ω (Max) |
| Load Type | Inductive |
| Height | 2.35mm |
| Length | 18.1mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN772K Overview
It is packaged with Tube.A cost-saving measure is taken to include H bridge in the 28-SOIC (0.295, 7.50mm Width) package.With the 5.5V~36V supply voltage, improved reliabilbridge drivery can be achieved.There is a mounting of H bridge circuit in Surface Mount.Motor driver H bridge works normally at -40°C~150°C TJ's operating temperature.There are a variety of applications for H bridge motor driver, including DC Motors, General Purpose, Relays.Mount the board using Surface Mount.Status Flag is another of full bridges specific characteristics.A transmission line is terminated with a H bridge that matches its characteristic impedance, referred to as a 28 termination.It is used as a pronged contact as H bridge ic of a signal interface when 28 pins are used.Its base H bridge ic number, VN772, can be used to locate other H bridge ics that are related.For the operation of the H bridge, a voltage supply of 13V is used.This H bridge circuit incorporates an analog IC with the type BRUSH DC MOTOR CONTROLLER.A H-bridge in the OMNIFET II?, VIPower? series, this is a type of electronic H-bridge.The power supply pins and the output pins are conducting a current of 8.5A.A number of 28 pins work together to provide this bridge driver with its specific functions.There are 4 outputs on this Hbridge.
VN772K Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : VN772
VN772K Applications
There are a lot of STMicroelectronics VN772K Full Bridge Drivers, Half-Bridge Drivers applications.
- CD players
- Audio-visual equipment
- Notebook Computers
- Compact Blade Servers
- VTR
- DC-DC Converters
- Dual DC motor
- High-Current DC-DC Point-of-Load Converters
- Bipolar stepper motor
- Industrial Pumps