VN750S
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 4.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN750 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 25mA |
| Output Configuration | High Side |
| Power Dissipation | 4.2W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 6A |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Thickness | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
VN750S Description
The VN750 is a monolithic device designed using STMicroelectronic? VIPower? M0-3 technology. The VN750 is intended for driving any type of load with one side connected to ground.
VN750S Features
CMOS compatible input
On-state open-load detection
Off-state open-load detection
Shorted load protection
Undervoltage and overvoltage shutdown
Protection against loss of ground
Very low standby current
Reverse battery protection