VN750PT-E
| Parameters | |
|---|---|
| Factory Lead Time | 20 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 60W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN750 |
| Pin Count | 5 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | High Side |
| Power Dissipation | 60W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 6A |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| On-State Resistance | 60mOhm |
| Height | 2.63mm |
| Length | 6.6mm |
| Width | 6.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN750PT-E Overview
It is package in Tube case.The TO-252-5, DPak (4 Leads + Tab), TO-252AD package includes it.The lighting driver has the mounting type Surface Mount.General Purpose is the type of switch owned by it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.Operation is based on Not Required supply voltage.It has a maximum output voltage of N-Channel volts.There are Auto Restart, Status Flag features available on the LED driving board.It belongs to the VN750 family.A total of 5 terminations have been found in it.The operation is performed through the 5 pins.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 6A in order to meet the operation requirements.With a supply voltage of 13V, high efficiency is possible.Surface Mount is mounted in the way of this lighting driver.As a result, it has a total of 5 pins.Currently, the LED driving board has a resistance of 60mOhm ohms.It is included in the VIPower? series.In this case, the output current will be set to 6A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).8/36V is the power supply of the part.A supply voltage of 13V is recommended for maximum efficiency.This system has a maximum current requirement of 3.5mA.There are 1 drivers associated with this part.
VN750PT-E Features
Supplied from 13V
Resistance of 60mOhm
VN750PT-E Applications
There are a lot of STMicroelectronics VN750PT-E Power Switches ICs applications.
- Hot-Swap Systems
- Storage Drives
- Wearable Devices
- USB Power Distribution
- Notebook and Tablet Computers
- Smartphone and PDA
- Portable Video Game Players
- Telecom and Network Systems
- Portable/Handheld Devices
- PC Cards