VN5E016AH-E
| Parameters | |
|---|---|
| Factory Lead Time | 42 Weeks |
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-7, DPak (6 Leads + Tab) |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Resistance | 16mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.85mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN5E016 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 73A |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 1.5mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 54A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 73A |
| Rds On (Typ) | 16m Ω (Max) |
| High Side Driver | YES |
| Height Seated (Max) | 2.4mm |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5E016AH-E Overview
Tube is how it's packaged.It is included in the package TO-252-7, DPak (6 Leads + Tab).A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Features of the lighting driver are Auto Restart.It belongs to the VN5E016 family.It has a total of 7 terminations.It is necessary to use the 7 pins in order to operate the LED driver.It consists of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 73A.High efficiency is possible at 13V supply voltage.As a result, it is mounted in the manner of Surface Mount.This LED driver is equipped with a total of 7 pins.16mOhm resistance is present in the lighting driver.This electrical component is included in the VIPower? series.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The LED driver is configured with a maximum supply voltage of 28V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 4.5V.It has a power supply of 8/28V.
VN5E016AH-E Features
Supplied from 13V
Resistance of 16mOhm
VN5E016AH-E Applications
There are a lot of STMicroelectronics VN5E016AH-E Power Switches ICs applications.
- Solid State Drivers
- USB3.1 Power Delivery
- Hot Swap
- Hot Swap
- Solid-State Drives
- Handheld Devices
- Storage (HDDs, SSDs)
- USB Protection
- PC Cards
- Set-Top Boxes