VN5E010AHTR-E
| Parameters | |
|---|---|
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 41V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 85A |
| Rds On (Typ) | 10m Ω |
| High Side Driver | YES |
| Height Seated (Max) | 2.4mm |
| Length | 6.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-7, DPak (6 Leads + Tab) |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.85mm |
| Base Part Number | VN5E010 |
| Pin Count | 6 |
| JESD-30 Code | R-PSSO-G6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 60A |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 1.5mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
VN5E010AHTR-E Overview
It is packaged in the manner of a Tape & Reel (TR).Package TO-252-7, DPak (6 Leads + Tab) contains it.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Auto Restart features.It is part of the VN5E010 family of LED drivers.A total of 6 terminations have been recorded.The operation is carried out using the 7 pins.As far as functions are concerned, the lighting driver has 1.The maximum output current must drop to 60A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.Surface Mount is mounted in the way.There are 6 pins in total on this board.These electrical components are part of the VIPower? series.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.Vsup (maximum supply voltage) is set to 28V.For normal operation, the supply voltage (Vsup) should be kept above 4.5V.A 8/28V power supply is used by the part.
VN5E010AHTR-E Features
Supplied from 13V
VN5E010AHTR-E Applications
There are a lot of STMicroelectronics VN5E010AHTR-E Power Switches ICs applications.
- Hot Swap
- Wireless Headsets
- Telecom and Network Systems
- USB3.1 Power Delivery
- Hot Swaps
- Wearable Devices
- Low Voltage I/O System Power
- PC Cards
- Solid State Drivers
- Smartphone and PDA