UDQ2916EBTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 10V TO 45V VBB SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDQ2916 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UDQ2916EBTR Overview
The package is designed with [0].A 44-LCC (J-Lead)case is included with the part.In general, it is recommended that the part be mounted by Surface Mount.I believe it is suitable for the component connected to General Purpose.In this case, the device can supply 4.75V~5.25V volts.Regarding the operating temperature, it is in the range of -40°C~150°C TJ°C.A motor of this type can be categorized as Brushed DC.There are 44 terminations available on this part.Voltage can be applied at a rate of 10V~45V volts to the load.Drivers controllers is important to remember that this amplifier should be run at 5V.Its recommended mounting way is Surface Mount.Maintain the current output of the part at 750mA volts.A STEPPER MOTOR CONTROLLERanalog integrated circuit is employed in this device.The UDQ2916part number is used to locate the part.44pins are available on the device.Drivers controllers belongs to Motion Control Electronics series.Drivers controllers also has a characteristic of [0].
UDQ2916EBTR Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on UDQ2916 number
Additional Feature: ALSO REQUIRES 10V TO 45V VBB SUPPLY
UDQ2916EBTR Applications
There are a lot of Allegro MicroSystems UDQ2916EBTR motor drivers applications.
- LED bias
- Large format LED backlighting
- High brightness LED lighting
- Building technology
- Human-centric lighting
- Outdoor area lights
- Mobile phone display backlight and key light driving
- Dash
- Infotainment backlighting
- Scanning equipment