UDN2982LWTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 8 |
| Supply Voltage | 35V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDN2982 |
| Pin Count | 18 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Polarity | NPN, PNP |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-EMITTER |
| Collector Emitter Voltage (VCEO) | 50V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 5V~50V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed) |
| Collector Emitter Saturation Voltage | 1.8V |
| Turn On Time | 2 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.65mm |
| Length | 11.55mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UDN2982LWTR Overview
Tape & Reel (TR) is the way it's packaged.It is included with the 20-SOIC (0.295, 7.50mm Width) package as well.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.Keeping the temperature at -20°C~85°C TA ensures reliable operation.The LED driver is equipped with 8 outputs.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of Bipolar volts.It comes under the family of UDN2982.The termination count is 18.During operation, the 18 pins are used.The LED driving board has a total of 8 functions.To comply with the operation criteria, the maximum output current is reduced to 500mA.It is possible to achieve a high level of efficiency with a supply voltage of 35V.Surface Mount is mounted in the way of this LED driving board.18 pins are connected to it in total.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.For normal operation, the supply voltage (Vsup) should be kept above 5V.
UDN2982LWTR Features
Supplied from 35V
UDN2982LWTR Applications
There are a lot of Allegro MicroSystems UDN2982LWTR Power Switches ICs applications.
- Storage Drives
- PC Cards
- Set-top-box
- Portable GPS Device
- HDD and SSD
- Wireless Modem Data Cards
- USB Ports/Hubs
- Hot Swap
- Low Voltage I/O System Power
- USB Power Distribution