UCC3809D-1G4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Base Part Number | UCC3809 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 80mA |
| Voltage - Supply (Vcc/Vdd) | 8V~19V |
| Control Features | Frequency Control, Soft Start |
| Topology | Boost, Buck, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Max Duty Cycle | 70 % |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Start Up | 15V |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3809D-1G4 Overview
An embedded ac to dc converter is included in 8-SOIC (0.154, 3.90mm Width) package.The AC/DC power converter is available in Tube .In this case, the AC/DC converter is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -55°C~150°C TJ °C in order to perform.This AC DC converter employs SWITCHING CONTROLLER analog IC type.Supply voltage (Vcc/Vdd) does not need to exceed 8V~19V .There have been 8 terminations of this program.It contains 8 pins.There are 8 pins on the ac-dc converter.It is suitable for mounting by Surface Mount .It is possible to search for similar acdc converters by using the UCC3809 family.AC to DC converter is necessary to run 1 outputs.The following ac to dc conversions are contained in Switching Regulator or Controllers .80mA is set as the output current.The output voltage of the AC/DC converter is 800mV .The power AC DC is capable of high efficiency when operated at a frequency of 1MHz .
UCC3809D-1G4 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 80mA
UCC3809D-1G4 Applications
There are a lot of Texas Instruments UCC3809D-1G4 AC DC Converters applications.
- Standby Power Supplies
- Networking
- Automotive Telematics
- Set Top Boxes (STB)
- Small off-line low voltage power supplies
- Power Adaptors
- AC?DC USB chargers for Cell Phones
- AC--DC Adapter
- ATX/BTX Auxiliary Power
- LED Driver