UCC28083DR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Base Part Number | UCC28083 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9.3V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28083DR Overview
A ac to dc converter of the package 8-SOIC (0.154, 3.90mm Width) contains the ac to dc converter.It is available in Tape & Reel (TR) AC/DC power converter.It is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~85°C TA degrees Celsius.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.At this point, the switching frequency reaches 50kHz~1MHz .The voltage range of the supply can be set to 8.3V~15V (Vcc/Vdd).There are a total of 8 terminations in it.It contains 8 pins.Up to 8 pins are present on the ac-dc converter.It is possible to search for similar acdc converters by using the UCC28083 family.In this AC to DC transformer, there are 2 outputs to run.AC to DC converter is contained in Switching Regulator or Controllers .We have set the output current to 1A .The voltage output by this AC/DC converter is 500mV .As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.
UCC28083DR Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at 50kHz~1MHz
With 8 pins
Output Current at 1A
UCC28083DR Applications
There are a lot of Texas Instruments UCC28083DR AC DC Converters applications.
- SMPS house keeping power supplies
- Digital cameras
- Laptops
- Battery Chargers
- Low-Voltage I/O System Power
- Standby power supplies for VCR
- USB-PD 2.0
- ATX/BTX Auxiliary Power
- Lighting controls
- Power tools