UCC2804PWTR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2804 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 25mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Voltage - Start Up | 12.5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2804PWTR Overview
This ac to dc converter is embedded in package 8-TSSOP (0.173, 4.40mm Width) .It is available in Tape & Reel (TR) AC/DC power converter.As you can see, this AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~85°C TA °C.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.As a result, the switching frequency reaches Up to 1MHz .As long as the supply voltage (Vcc/Vdd) is within the range of 8.3V~12V , the AC/DC converter may be used.In total, there are 8 terminations.In this ac/dc converter, there are 8 pins.There are 8 pins on the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .You can search similar acdc converters based on UCC2804 family.A total of 1 outputs need to be run.There are a ac to dc conversions included in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 1A .As a result, its output voltage is 1V .A high efficiency can be achieved by operating at a frequency of 1MHz .Always keep this AC to DC converter set to 10V .
UCC2804PWTR Features
Packaged with 8-TSSOP (0.173, 4.40mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 1A
UCC2804PWTR Applications
There are a lot of Texas Instruments UCC2804PWTR AC DC Converters applications.
- Adapter for ADSL
- Standby Power Supplies
- Low power ac?dc Adapters for Chargers
- AC/DC Adaptors/Chargers for Cell Phones
- Power tools
- Battery chargers for smart phones
- Smartphones
- Appliance Power Supplies
- Records
- Battery chargers for mobile devices with touchpad display