UCC2804NG4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| JESD-609 Code | e4 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Input Voltage-Nom | 10V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 0V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Power Dissipation | 1W |
| Current - Output | 1A |
| Frequency (Max) | 1MHz |
| Voltage - Output | 1V |
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 50 % |
| Height | 4.57mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC2804NG4 Overview
This ac to dc converter is embedded in package PDIP .The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.1MHz is the switching frequency.A total of 8 terminations have been recorded.A ac/dc converter with 8 pins is available.There are 8 pins on the ac-dc converter.The ac dc converters is suitable for mounting by Through Hole .In this AC to DC transformer, there are 1 outputs to run.AC to DC converter is included in Switching Regulator or Controllers .Its output voltage amounts to 5V .A high efficiency is achieved when operating at a frequency of 1MHz .REACH SVHC standard can be found at No SVHC .In all situations, this AC to DC converter should be set to 10V .When the maximum 85°C is set, the AC to DC power converter runs steadily.A minimum working temperature of -40°C is required for this isolated switch.The AC to DC power supply is designed to offer maximum design flexibility because it has a 1A output current.The AC to DC power supply is capable of operating with a minimum supply voltage of 0V volts.Its output voltage is 1V .There is a maximum frequency of 1MHz on this memory AC to DC converter.
UCC2804NG4 Features
Packaged with PDIP
Switching Frequency at 1MHz
With 8 pins
UCC2804NG4 Applications
There are a lot of Texas Instruments UCC2804NG4 AC DC Converters applications.
- Set Top Boxes (STB)
- Lighting controls
- Digital cameras
- AC/DC Adaptors/Chargers for E-books
- Standby power
- Home Appliance Applications
- Air Conditioning
- Utility meters
- Wireless System
- Standby power supplies for TV