UCC2804DTRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2804 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 25mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2804DTRG4 Overview
There is a ac to dc converter embedded in package 8-SOIC (0.154, 3.90mm Width) .Tape & Reel (TR) case is available for the ac dc converter.A AC/DC converter of this type is mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~85°C TA .An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.When the switching frequency reaches Up to 1MHz , the circuit is closed.This AC/DC converter is designed for use within the range of 8.3V~12V supply voltage (Vcc/Vdd).Total terminations are 8 .The ac/dc converter has 8 pins.There are 8 pins in total.Suitable mounting is provided by Surface Mount .You can search similar acdc converters based on UCC2804 family.The number of outputs to run is 1 .AC to DC converter is included in Switching Regulator or Controllers .Current output is set to 1A .The output voltage of the AC/DC converter is 1V .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 1MHz .In all situations, this AC to DC converter should be set to 10V .
UCC2804DTRG4 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 1A
UCC2804DTRG4 Applications
There are a lot of Texas Instruments UCC2804DTRG4 AC DC Converters applications.
- IoT Applications
- Consumer electronics
- Replaces linear transformers
- Chargers for cell/cordless phones
- Humidifier
- Portable Apparatus
- WiFi Wireless
- Battery Chargers
- AC?DC USB chargers for Cell Phones
- White goods