UCC27322DGNRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | HTSSOP EP |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Packaging | Tape & Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4V |
| Power Dissipation-Max | 3W |
| Nominal Supply Current | 1mA |
| Power Dissipation | 3W |
| Max Supply Current | 1mA |
| Current - Output | 9A |
| Propagation Delay | 70 ns |
| Turn On Delay Time | 70 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 9A |
| High Side Driver | NO |
| Turn Off Time | 0.07 µs |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC27322DGNRG4 Overview
A higher degree of flexibility is achieved by adopting its HTSSOP EP package.A packaging method of Tape & Reel is used.It's configured with 8 terminations.Surface Mount is the way it takes to mount the device.The pins are configured with 8 when designing the chip.A supply voltage of 14V is required for operation.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 9A limit to the output current.There are several useful electronic components within its subcategory MOSFET Drivers.There are 8 component pins on the board.The basis of this system consists of 1 outputs.The allowable maximum value of operating temperature is 105°C.Operating temperatures must not exceed -40°C.If you want a stable supply current, you should keep it at 1mA.Its maximum operating voltage is 15V.The supply voltage of 4V is its minimum value for operation.Mosfet gate drivers outputs a current of 9A.Its input is characterized by STANDARD.
UCC27322DGNRG4 Features
Embedded in the Tape & Reel package
8 pins
UCC27322DGNRG4 Applications
There are a lot of Texas Instruments UCC27322DGNRG4 gate drivers applications.
- Power factor correction (PFC) circuits
- Automotive Applications
- Active filtering
- Portable Navigation Devices
- Isolated Gate Driver Supplies
- Industrial Motor Inverter - Power Tools, Robotics
- Dual-Battery Systems
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Broadcast equipment
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,