UCC2580N-4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Base Part Number | UCC2580 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 400mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~15V |
| Quiescent Current | 2.5mA |
| Control Features | Soft Start |
| Input Voltage (Min) | 10V |
| Topology | Flyback, Forward |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 14V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Max Duty Cycle | 69 % |
| Switching Frequency | 430kHz |
| Duty Cycle | 66% |
| Output Isolation | Isolated |
| Voltage - Start Up | 15V |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC2580N-4 Overview
This ac to dc converter is included in the package 16-DIP (0.300, 7.62mm) .There is a AC/DC power converter of Tube available.There is a mounting point for this AC/DC converter in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -55°C~150°C TJ °C in order to achieve its full performance.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .Vcc/Vdd can be used within the range of 8.5V~15V supply voltage.A total of 16 terminations have been recorded.On the ac/dc converter, there are 16 pins.In this ac-dc converter, there are 16 pins.The ac dc converters is suitable for mounting by Through Hole .It is possible to search for similar acdc converters by using the UCC2580 family.There are 2 outputs to be run.The ac to dc conversions are contained in Switching Regulator or Controllers .We have set the output current to 100mA .As a result, its output voltage is 400mV .This power AC DC is capable of reaching high efficiency when operating at a frequency of 1MHz .On the basis of a unique technique, the input voltage can be ensured to be 14V .When 2.5mA is reached, AC to DC converter consumes quiescent current.
UCC2580N-4 Features
Packaged with 16-DIP (0.300, 7.62mm)
With 16 pins
Output Current at 100mA
UCC2580N-4 Applications
There are a lot of Texas Instruments UCC2580N-4 AC DC Converters applications.
- Digital cameras
- Replacements for bulky plug-in transformers
- Portable audio
- Chargers for cell/cordless phones
- Small off-line low voltage power supplies
- WiFi Wireless
- Power Adaptors
- ZigBee
- Battery Chargers
- Universal input AC/DC adapters (15W - 45W)