UC2950T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Weight | 1.930007g |
| Operating Temperature | -20°C~100°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | 5V Regulated Output |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Max Power Dissipation | 15W |
| Technology | Bipolar |
| Voltage - Supply | 8V~35V |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 300kHz |
| Base Part Number | UC2950 |
| Pin Count | 3 |
| Output Voltage | 3V |
| Max Output Current | 4A |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 36mA |
| Output Configuration | Half Bridge |
| Power Dissipation | 15W |
| Output Current | 4A |
| Max Supply Current | 36mA |
| Turn On Delay Time | 500 ns |
| Output Characteristics | TRI-STATE |
| Output Current per Channel | 2A |
| Turn-Off Delay Time | 2 μs |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Voltage - Load | 8V~35V |
| Fault Protection | Over Temperature |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 4A |
| Built-in Protections | THERMAL |
| Load Type | Inductive, Capacitive |
| Height | 4.7mm |
| Length | 10.16mm |
| Width | 8.51mm |
| Thickness | 4.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2950T Overview
For packaging, Tube is used.For cost-saving purposes, H bridge is included in the TO-220-5 package.Bridge driver is possible to improve the reliabilbridge drivery of 8V~35V by increasing the supply voltage.In the way of Through Hole, H bridge circuit is mounted.In order for -20°C~100°C TJ to function normally, motor driver H bridge needs to be kept at a certain temperature.General Purpose is pretty useful in a variety of applications.Through Hole is adopted as a technique to mount H gate on the PCB.5V Regulated Output is another of full bridges specific characteristics.5 terminations are used to terminate transmission lines with H bridges that match their characteristic impedance.A signal interface uses 5 pins as pronged contacts.Based on its base H bridge ic number of UC2950, further related H bridge ics can be identified.A voltage of 12V is used as the supply voltage.The maximum load current a power supply can provide at a specified ambient temperature is 4A.Currently, 4A current flows through the output and power supply pins.It is through the 3 pins that the bridge driver can perform its specific functions.The voltage released by the Hbridge is 3V.The system includes 2 drivers.
UC2950T Features
Available in TO-220-5 Package / Case
Operating Temperature at the range of Through Hole
Interface IC Type : UC2950
UC2950T Applications
There are a lot of Texas Instruments UC2950T Full Bridge Drivers, Half-Bridge Drivers applications.
- VTR
- DC-DC Converters
- Voltage Regulators for GPUs
- Notebook Computers
- Dual DC motor
- Bipolar stepper motor
- DVD players
- High-Current DC-DC Point-of-Load Converters
- Optical disc drives
- Voltage Regulators for CPUs