UC2852N
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Voltage - Supply | 13V~30V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 200kHz |
| Base Part Number | UC2852 |
| Pin Count | 8 |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 12.5V |
| Output Current-Max | 1A |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Switcher Configuration | SINGLE |
| Mode | Continuous Conduction (CCM) |
| Current - Startup | 400μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2852N Overview
The package is 8-DIP (0.300, 7.62mm)-shaped.A Tube-packaging method was used to package it.Depending on the device, the mounting type will either be Through Hole or C.In order to operate, it should be plugged into 13V~30V's voltage supply.Device -40°C~85°C is set to operate.There are also other types of ICs in the part, such as the POWER FACTOR CONTROLLER type.The gadget comes with several 8 terminals.Startup current is 400μA.Pin number 8 remains the same for the component.The device's best part has a number of UC2852 in it.The 8 pins are summed up.Minimum input voltage is 12.5V, and it can function on this voltage.In a way, it's a subclass of Switching Regulator or Controllers.It has a maximum input voltage (Max) of 30V.With a frequency of 200kHz, it can continue to operate with good accuracy as long as it has a frequency of 200kHz.There is a mountain named Mount Through Hole that consists of it.As a result, it works in a 1A output current at the maximumIsup, the maximum supply current, shall not be more than 6mA.
UC2852N Features
UC2852N Applications
There are a lot of Texas Instruments UC2852N PFC PMICs applications.
- SCP configurator
- Telematics
- Analog control systems
- Disk drivers
- FPGA power
- Light networks
- LED lighting
- EPS (Electric Power Steering)
- Electronic notebook
- Camera