UBA2014T/N1,518
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -25°C~80°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Ballast Controller |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| HTS Code | 8542.31.00.01 |
| Voltage - Supply | 9.1V~13V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Frequency | 40.5kHz~100kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UBA2014 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Current - Supply | 1.5mA |
| fmax-Min | 0.09 MHz |
| Dimming | No |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
UBA2014T/N1,518 Overview
In accordance with the materials used by Tape & Reel (TR).Electronics manufacturers recogni16-SOIC (0.154, 3.90mm Width)e the 16-SOIC (0.154, 3.90mm Width)'s low package cost.Using Surface Mount, the board is mounted.As Type Ballast Controller, it is suitable for standard grade applications.It requires a power supply voltage to function properly.In all cases, -25°C~80°C should be operated.It is still accurate at 40.5kHz~100kHz frequency.There is a number UBA2014 in the device's best part.The structure is made up of 16-terminations.In this system, 1.5mA's supply current is used to power the system.During operation, the device is in 1 mode.There are 16 pins total in its sum.The component is always powered by 13V.
UBA2014T/N1,518 Features
Mounting type of Surface Mount
Supply voltage of 13V
UBA2014T/N1,518 Applications
There are a lot of NXP USA Inc. UBA2014T/N1,518 Lighting Controllers applications.
- Lighting ballast
- DC link
- Power factor correction (PFC)
- Noise filtering
- Decoupling or bypassing
- Signal decoupling & power bypass
- To enhance power efficiency
- UPS buffering
- Server motherboards
- Power line buffering