U2008B-MY
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-DIP |
| Operating Temperature | -10°C~125°C TJ |
| Packaging | Tube |
| Published | 1997 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -10°C |
| Applications | General Purpose |
| Technology | Bipolar |
| Voltage - Supply | 14.5V~16.8V |
| Base Part Number | U2008B |
| Function | Triac Controller |
| Number of Outputs | 1 |
| Max Output Current | 125mA |
| Operating Supply Voltage | 16.5V |
| Interface | On/Off |
| Max Supply Voltage | 16.8V |
| Min Supply Voltage | 14.6V |
| Nominal Supply Current | 3mA |
| Output Configuration | Pre-Driver - Triac |
| Output Current | 125mA |
| Motor Type - AC, DC | AC, Induction |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
U2008B-MY Overview
Drivers controllers is designed with Tube package.8-DIP (0.300, 7.62mm)cases are included with the part.Ideally, the part should be mounted by Through Hole.As a result, it is appropriate for the component connected to General Purpose.14.5V~16.8V volts can be supplied by the device.This device operates at a temperature range of -10°C~125°C TJ.Drivers controllers is possible to categorize the motor type as AC, Induction.There is a recommended mounting method of Through Hole.Based on the U2008Bpart number, it is found.In this device, there are 8 pins.Drivers controllers is possible to access 1outputs.A voltage of 16.5V is used as the supply voltage for this driver.Having a 125mAoutput current, it provides maximum design flexibility.At its maximum operating temperature, the device reaches 125°C.There should be a temperature higher than -10°Cduring operation.For the purposes of meeting its operation requirements, the maximum output current reaches [0].This device can be used with a maximum voltage of 16.8V.In addition to working at a voltage of 14.6V, it is capable of working at high voltages as well.
U2008B-MY Features
Applications : General Purpose
base on U2008B number
designed with 1 outputs
U2008B-MY Applications
There are a lot of Microchip Technology U2008B-MY motor drivers applications.
- Alternative to HID lights
- Commercial office
- Fog lamps
- Building technology
- Street lights
- High power LED street light
- AM radio
- Charge pump circuits
- Horticultural applications
- Digital still cameras