TSM934ESE+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2015 |
| Series | TSM93x |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Reach Compliance Code | unknown |
| Base Part Number | TSM934 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 4 |
| Nominal Supply Current | 6.5μA |
| Power Dissipation | 696mW |
| Output Current | 40mA |
| Propagation Delay | 12 μs |
| Quiescent Current | 6.5μA |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Voltage - Input Offset (Max) | 10mV @ 2.5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 40mA |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TSM934ESE+ Overview
In order to make transportation easier, it is packaged in 16-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, Push-Pull, TTL output type.We ship the part through Tube .The chip belongs to Comparator .Electronic comparator can be classified as a with Voltage Reference chip.Currently, it consists of only 4 elements.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator is equipped with 16 pins.In case you are looking for more pin-to-pin solutions, you may want to search TSM934 .This comparator presents a quiescent current of 6.5μA .The PCB or other board can be mounted using the Surface Mount on it.Normal use of the device should require a nominal supply current of 6.5μA .Comparator electronics is a comparator part from the TSM93x series.
TSM934ESE+ Features
CMOS, Push-Pull, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 6.5μA
TSM934ESE+ Applications
There are a lot of Silicon Labs TSM934ESE+ linear comparators applications.
- Factory automation & control
- DC/DC and AC/DC power supplies
- Ultra-Low Power Systems
- Threshold Detectors
- Lithium ion battery monitoring
- Wireless Base Stations
- Set Top Boxes
- Simple Analog-to-Digital Converters (ADCs)
- Hand-Held Electronics
- Analog front end