TSM932CUA+
| Parameters | |
|---|---|
| Terminal Pitch | 0.65mm |
| Base Part Number | TSM932 |
| JESD-30 Code | S-PDSO-G8 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 2 |
| Output Current | 40mA |
| Propagation Delay | 12 μs |
| Quiescent Current | 4.5μA |
| Supply Current-Max | 0.0058mA |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Voltage - Input Offset (Max) | 10mV @ 2.5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 12μs |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2015 |
| Series | TSM93x |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3V |
TSM932CUA+ Overview
A convenient transport package is provided in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .This comparator is of the CMOS, Push-Pull, TTL output type.Electronic comparator is shipped by Tube .There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.This is a typical comparator of type with Voltage Reference .Electronic comparator has a total of 2 elements.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .Alternatively, you may search for TSM932 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 4.5μA volts.There is a Surface Mount on the board for mounting to a PCB or other board.This part can be supplied with a maimum current of 0.0058mA .A comparator part from the TSM93x series is used in this part.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
TSM932CUA+ Features
CMOS, Push-Pull, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 4.5μA
TSM932CUA+ Applications
There are a lot of Silicon Labs TSM932CUA+ linear comparators applications.
- Portable Battery Monitoring
- Mobile Communications
- Metering Systems
- Point of load regulators
- Building automation
- Industrial
- General-Purpose, Low-Voltage Applications
- Zero-Crossing Detectors
- Power management
- Handheld Instruments