TS864IPT
| Parameters | |
|---|---|
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 240dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 12V |
| Max Input Current | 300pA |
| Input Bias Current | 300pA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 300pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR |
| Natural Thermal Resistance | 250 °C/W |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TS864 |
| Pin Count | 14 |
| Output Type | Push-Pull |
| Number of Elements | 4 |
| Power Supplies | 2.7/10V |
| Nominal Supply Current | 56μA |
| Power Dissipation | 710mW |
| Max Supply Current | 56μA |
| Propagation Delay | 2 μs |
| Quiescent Current | 16μA |
| Response Time | 2000 ns |
TS864IPT Overview
A convenient packaging is provided in the form of 14-TSSOP (0.173, 4.40mm Width) .There is a Push-Pull output type for this comparator.We ship the part through Tape & Reel (TR) .The comparator has 14 terminals.The electrical component in this case belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as General Purpose .Electronic comparator consists of 4 elements in total.The device is equipped with 14 pins.The type of mounting recommended is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator is equipped with 14 pins.You can find more pin-to-pin solutions for your special requirements by searching TS864 .This comparator presents a quiescent current of 16μA .The PCB or other board has a Surface Mount for mounting.Normal use of the device should require a nominal supply current of 56μA .An excess of current supply over 56μA could result in malfunction of the comparator.A power supply of 2.7/10V is sufficient for the operation of the device.Input current to the device is limited to 300pA .In accordance with the voltage formula, the part's voltage gain is 240dB .
TS864IPT Features
Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS864IPT Applications
There are a lot of STMicroelectronics TS864IPT linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Pulse, Squarewave, and Time Delay Generators
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Portable and Battery-Powered Systems
- Zero-Crossing Detectors
- Alarm and Monitoring Circuits
- Window Comparators
- General Purpose Low Voltage Applications
- Wearable Devices