TS5A3357DCURG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 15Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TS5A3357 |
| Pin Count | 8 |
| Number of Outputs | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1μA |
| Turn On Delay Time | 6.5 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 334MHz |
| Turn-Off Delay Time | 3.7 ns |
| On-State Resistance (Max) | 15Ohm |
| Multiplexer/Demultiplexer Circuit | 3:1 |
| Off-state Isolation-Nom | 81 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 4.5pF 10.5pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SP3T |
| Switch Time (Ton, Toff) (Max) | 6.5ns, 3.7ns |
| Charge Injection | 3.4pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -62dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NO |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A3357DCURG4 Overview
This electronic part is conveniently packaged in 8-VFSOP (0.091, 2.30mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 3:1. Operation at a temperature around -40°C~85°C TA. A total of 8 terminations have been recorded. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 1.8V voltage supply. The electronic part body is injected with 8 pins. Multiplexers built on a SP3T switching circuit are built. If you are looking for variants of the digital switch, trying search with TS5A3357. An switch multiplexer with 15Ohm internal resistance has a value of 15Ohm. For details about the functions of 8 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. The analog switch ic is of the Single supply type and is cost-effective. A low voltage of 1.65V should be applied to the electronic component. This multiplexer would work with 1μA current. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. Among the inputs that can be operated are the 1 inputs. 334MHz bandwidths enable data to be transferred. The analog switch ics includes 3 outputs.
TS5A3357DCURG4 Features
1 Channels
Switch Circuit: SP3T
1μA Supply Current
Bandwidth: 334MHz
TS5A3357DCURG4 Applications
There are a lot of Texas Instruments TS5A3357DCURG4 Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- Cable Modem
- Cellular phones
- Industrial and process control systems
- Battery Powered Instruments
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Power routing
- Ultrasound
- 65 V DACs
- Optical Applications