TS5A3167DCKRG4
| Parameters | |
|---|---|
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 900mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TS5A3167 |
| Output | SEPARATE OUTPUT |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 100nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 7 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 11.5 ns |
| -3db Bandwidth | 150MHz |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 64 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 19pF 18pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 7.5ns, 11ns |
| Charge Injection | 6pC |
| Switching | MAKE-BEFORE-BREAK |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NC |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
TS5A3167DCKRG4 Overview
The electronic component is convenient to ship overseas because it is packed in a 5-TSSOP, SC-70-5, SOT-353. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -40°C~85°C TA extended. Totally, there are 5 terminations. As a result of its 1 channels, this electronic component provides high-quality output. With a 1.8V voltage supply, the electrical component should be turned on and run. As part of its design, the 5 series is equipped with this electronic component. On the other hand, analog switches can be constructed using SPST - NC switching circuits. If you are looking for variants of the digital switch, trying search with TS5A3167. Internally, this switch multiplexer has a resistance of 900mOhm. Datasheets for functions of 5 pins are available. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. There should be 1.65V voltage fed to the electrical part below 1.65V. This multiplexer would work with 10nA current. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. If you put voltage higher than 100nA on the digital multiplexer, damage may occur. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The 1 inputs need to be operated in order to work. There are various bandwidths available for data transfer.
TS5A3167DCKRG4 Features
1 Channels
Switch Circuit: SPST - NC
10nA Supply Current
-3db Bandwidth: 150MHz
Bandwidth: 200MHz
TS5A3167DCKRG4 Applications
There are a lot of Texas Instruments TS5A3167DCKRG4 Analog Switches & Multiplexers ICs applications.
- Relay replacements
- T1/E1 Terminals
- Audio and video routing
- Imaging
- Sample hold systems
- USB 1.1 signal switching circuits
- Isolation
- Residential Gateways, Home Gateway/Router
- Cell phones
- Microprocessor Controlled Analog Systems