TS5A3159DCKTG4
| Parameters | |
|---|---|
| Turn-Off Delay Time | 15 ns |
| On-State Resistance (Max) | 1.1Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 63 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 23pF |
| On-state Resistance Match-Nom | 0.7Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 35ns, 20ns |
| Charge Injection | 36pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -65dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 95ns |
| Switch-off Time-Max | 70ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 1.1Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TS5A3159 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 100nA |
| Max Supply Current | 100nA |
| Turn On Delay Time | 20 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 100MHz |
TS5A3159DCKTG4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 6-TSSOP, SC-88, SOT-363. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature around -40°C~85°C TA extended. In total, there have been 6 terminations. The electronic part delivers high-quality output through its 1 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. Into the electrical component body are injected 6 pins. Multiplexers built on a SPDT switching circuit are built. TS5A3159 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 1.1Ohm. Datasheets for functions of 6 pins are available. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 1.65V. 100nA current would be enough for this multiplexer to operate. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. The analogue multiplexer may be damaged if voltage is greater than 100nA. A 1 input needs to be operated. It is possible to transfer data over a 100MHz-bandwidth. In this digital multiplexer, there are 2 outputs.
TS5A3159DCKTG4 Features
1 Channels
Switch Circuit: SPDT
100nA Supply Current
Bandwidth: 100MHz
TS5A3159DCKTG4 Applications
There are a lot of Texas Instruments TS5A3159DCKTG4 Analog Switches & Multiplexers ICs applications.
- DSUs
- SDH/SONET multiplexers
- Cellular phones
- Automatic test equipment
- Imaging
- Fiber to the Home
- Digital Cross-Connects
- Low-Voltage
- Data Acquisition Systems
- Switching Systems