TS5A3157DBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 6.492041mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 10Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | VIDEO APPLICATION |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TS5A3157 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5μA |
| Nominal Supply Current | 2.5μA |
| Max Supply Current | 5μA |
| Turn On Delay Time | 9.5 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 7.5 ns |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5.5pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 8.5ns, 6.5ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -66dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NC |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A3157DBVRG4 Overview
Presented in SOT-23-6, this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. Totally, there are 6 terminations. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. An injection of 6 pins is performed into the body of the electrical component. A SPDT switching circuit is used to build these analog multiplexers. TS5A3157 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 10Ohm. You can find the functions of the 6 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. A cost-effective Single supply type analogue multiplexer. 1.65V should be the lowest voltage fed to the electronic component. 2.5μA current would be enough for this multiplexer to operate. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. When the digital multiplexer is charged above 5μA, damage can occur. It is possible to operate 1 inputs. It is possible to transfer data over a 300MHz-bandwidth. You shouldn't miss the additional features of the electrical component, such as: VIDEO APPLICATION. The analog switch ics has 2 outputs.
TS5A3157DBVRG4 Features
1 Channels
Switch Circuit: SPDT
2.5μA Supply Current
Bandwidth: 300MHz
Additional Features: VIDEO APPLICATION
TS5A3157DBVRG4 Applications
There are a lot of Texas Instruments TS5A3157DBVRG4 Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Sample hold systems
- Communications systems
- ISDN NT1/TA
- Ultrasound
- Battery Powered Instruments
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Access Concentrators
- SDH/SONET multiplexers
- ATM