TS5A23167DCURG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 900mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TS5A23167 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 100nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 18 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Bandwidth | 150MHz |
| Turn-Off Delay Time | 15.5 ns |
| -3db Bandwidth | 150MHz |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 19pF 18pF |
| On-state Resistance Match-Nom | 0.04Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 7.5ns, 11ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 40m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NC |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A23167DCURG4 Overview
This electronic part is conveniently packaged in 8-VFSOP (0.091, 2.30mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 8. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. This electronic part can be found in the 8 series. These analog multiplexers are built based on SPST - NC switching circuits. Look for analog switch ic variants by searching with TS5A23167. There is 900mOhm internal resistance in this digital multiplexer. The datasheets for the 8 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. There should be 1.65V voltage fed to the electrical part below 1.65V. For this multiplexer to operate, 10nA current would be sufficient. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. Putting voltage greater than 100nA on the multiplexer may cause damage. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The electrical component supports 2 inputs. In 150MHz-bandwidths, data can be transferred.
TS5A23167DCURG4 Features
1 Channels
Switch Circuit: SPST - NC
10nA Supply Current
-3db Bandwidth: 150MHz
Bandwidth: 150MHz
TS5A23167DCURG4 Applications
There are a lot of Texas Instruments TS5A23167DCURG4 Analog Switches & Multiplexers ICs applications.
- MP3 players
- Optical Applications
- PBXs
- Battery-powered systems
- Microprocessor controlled systems
- Medical Instrumentation
- Digital cross connects (DSX-1)
- Mechanical reed relay replacement
- Channelized and Unchannelized DS3 applications
- Automatic test equipment