TPS62693YFDT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | ALSO OPERATES IN PFM CONTROL TECHNIQUE |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Terminal Pitch | 0.4mm |
| Base Part Number | TPS62693 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Voltage - Input (Max) | 4.8V |
| Output Voltage | 2.85V |
| Output Type | Fixed |
| Max Output Current | 800mA |
| Input Voltage-Nom | 3.6V |
| Min Supply Voltage | 2.3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 19μA |
| Max Output Voltage | 3.3V |
| Voltage - Output (Min/Fixed) | 2.85V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 3MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 2.2V |
| Height | 400μm |
| Length | 0m |
| Width | 0m |
| Thickness | 178μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS62693YFDT Overview
There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. As you can see, this harley voltage regulator contains 6 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. Space-saving 6-XFBGA, DSBGA packages are available for this harley voltage regulator. 1 outputs have been configured in the voltage regulator 12v. On its output pins, this adjusting voltage regulator generates Fixed output. A Surface Mount mounting is required for this switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. There is a switching frequency of 3MHz for this voltage regulator 12v. The output voltage (Min/Fixed) of this voltage regulator 12v is 2.85V. As far as the voltage input is concerned, DC DC switching regulator can accept up to 4.8V. The voltage regulator 12v is designed to provide a nominal input voltage of 3.6V for operation. DC/DC regulators such as this one belong to the TPS62693 family of products. At 2.85V volts, voltage regulator can provide voltage. In order to operate voltage regulator, 6 pins are required. The output voltage of this voltage regulator 12v should at least be set at 2.2V volts at all times. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 800mA A. A maximum voltage of 3.3V can be obtained from the regulator voltage. Voltage regulator consumes 19μA A of quiescent current without being affected by outside forces. 2.3V V supply voltage ensures reliable performance of adjusting voltage regulator. In addition to adding efficiency and stability to the harley voltage regulator, the ALSO OPERATES IN PFM CONTROL TECHNIQUE feature brings even greater benefits.
TPS62693YFDT Features
1 outputs
6 pins
ALSO OPERATES IN PFM CONTROL TECHNIQUE
TPS62693YFDT Applications
There are a lot of Texas Instruments TPS62693YFDT Voltage Regulators applications.
- Overvoltage protection circuits in TV sets
- Boring machines
- Surge protection circuits
- Production lines
- Smoke prevention equipment
- Wind power
- Experimental setup
- Electric water heaters
- Milling machines
- Shearing machines