TPS53114PWP
| Parameters | |
|---|---|
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | D-CAP2™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 700kHz |
| Base Part Number | TPS53114 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 170mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Quiescent Current | 350μA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Frequency - Switching | 350kHz 700kHz |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Switcher Configuration | PUSH-PULL |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
TPS53114PWP Overview
The switching controller fits in the 16-PowerTSSOP (0.173, 4.40mm Width) package and is ideal for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~24V volts and has 4.5V~24V supply voltage. Work well in dc switchers with a -40°C~85°C TA. The switching controller can be switched at 350kHz 700kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminal (s) are designed at DUAL . Various 16 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. You can find other relevant dc to dc converter ics by searching "TPS53114". 16 pins are on switching converter. DC regulator outputs 5.5V voltage according to the test statistics. The dc dc regulator's usual output current is 170mA, which should be noted down when you start a project. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at a frequency of 700kHz. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V. It is suggested that users apply 5.5V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. D-CAP2? series dc to dc voltage regulator belong to this series. Dormant dc switchings use 350μA. The maximum input voltage of the dc switcher is 24V, so users need to limit the voltage accordingly. Depending on the datasheet, the switching converter can output 5.5V volts at its peak. Lowest voltage output of the voltage controller must be greater than 760mV.
TPS53114PWP Features
Transistor Driver Outputs
Switching Frequency: 350kHz 700kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 700kHz
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V
TPS53114PWP Applications
There are a lot of Texas Instruments TPS53114PWP DC to DC converter applications.
- Electrical distribution systems
- Automatic plug-in machines
- Domestic water pumps
- Thermal power
- Industrial controllers
- Television equipment
- Fire elevators
- Precision electronic equipment
- Special machining machine tools
- Digital video recorders