TPS40211DRCTG4
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Voltage | 8V |
| Max Output Current | 6A |
| Input Voltage-Nom | 12V |
| Temperature Grade | AUTOMOTIVE |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Current - Output | 400mA |
| Quiescent Current | 1.5mA |
| Frequency (Max) | 1MHz |
| Voltage - Output | 250V |
| Topology | Boost |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Max Input Voltage | 52V |
| Control Technique | PULSE WIDTH MODULATION |
| Max Duty Cycle | 95 % |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TPS40211DRCTG4 Overview
There are 1 outputs used for the design of this LED drivers.In order for it to operate, it has 10 terminations.There are 10 pins on the base of this LED driver.A voltage output of 250V is provided by this device.The device has 10 pins.As a result, its characteristics can also be categorized as Switching Regulator or Controllers.At a voltage of 4.5V, it operates at a minimal input voltage.Supply current is limited to 52V at its maximum value.An operating temperature above 125°C should ensure stable operation.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.Even when operating at a maximal output current of 6A, it is capable of delivering all the benefits of a LED driver.In the absence of external factors, 1.5mA current is consumed.This device produces a voltage of 8V as its output.When operating the device, 12V volts are assigned to the circuit.The part output current should be kept at 400mA.This device uses the analog IC of SWITCHING REGULATOR.
TPS40211DRCTG4 Features
Output voltage of 8V
TPS40211DRCTG4 Applications
There are a lot of Texas Instruments TPS40211DRCTG4 LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- Stage and Studio lighting
- White LED Backlight for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED backlight driver for LCD displays for portable equipment
- Dimmable LED for vehicle interiors
- Panel lighting
- General lighting
- LED Lightings for Industrial Equipment
- Linear fluorescent